Piper Cherokee 140 Lasergeschnittenes Guillotine GUILLOW 307LC

Piper Cherokee 140 Lasergeschnittenes Guillotine GUILLOW 307LC Piper Cherokee 140 Laser-Cut Guillow Guillow GU0307LC - Piper Cherokee 140 Airplane Kit - Laser-Cut
Now with LASER CUT BALSA PARTS!!!
Fast, maneuverable, with a modern low wing and “total handling ease”, the all metal Piper Cherokee 140 has been a common sight airports all over the country. More than just a point to point means of transportation, the 140 is licensed for spins, lazy 8’s and chandelles characteristics which made the world famous Piper Cub the leading sport plane of its era. Last but not least, the 140 seats up to 4 adult passengers in relative comfort.
Wing Span: 508mm
Scale: 1/20
For Ages 14+

To cover with tissue provided in kit, use a 50/50% mixture of white glue (for example Titebond Original Wood Glue) and water to adhere the tissue onto the framework.
Sand the framework very well!
Mix your "glue mixture" out of 50% water & 50% White glue
Cut a piece of tissue a bit oversized for the piece you are covering (lets say the rudder in this case)
Brush on some glue mixture down around the perimeter of the rudder structure
Lay your tissue down and smooth it out as much as you can by pulling a bit and smoothing with your fingers
Brush ANOTHER coat of glue mixture THRU the tissue (around the perimeter) to assure a good bond
Let the glue dry and then trim off excess tissue with sharp razor blade or model knife
Repeat for other side of rudder - overlapping tissue slightly!
When the part is all done, dry and trimmed, you can mount it on your plane.
When mounted, a fine mist spray of water will help shrink the tissue a bit and take out any wrinkles, making it nice and taut for flying.