E4Q Li-Po Quad-Ladegerät DC* Disc. SKYRC SK-100140

E4Q Li-Po Quad-Ladegerät DC* Disc. SKYRC SK-100140 E4Q Li-Po Quad Charger DC* Disc. SkyRC E4Q DC LiPo Charger

Quattro is Efficiency and Economical
Having to recharge your LiPo batteries individually in order to power your drone can be such a tedious approach because you might have to wait for many hours before they are all full.

With E4Q, 4 different cells batteries (2-4S) at the same time by the four independent ports.

Charging through Balance Port
Save you time of plugging the other cable - charging is balancing!

Powered by the most Popular XT 60 Connector
Powered by the original high-temp Nylon XT60, manufactured by AMASS, which can handle over 60A current for extended periods without exceeding 80DegC thanks to their gold-plated spring pins’ better contact surface area.

The plug is also less likely to deform or melt in comparison to copied non-Nylon XT60 plugs.

Wide voltage range of 11v through 26.1v gives RC hobbyists more flexibility.

Buttons And Port
The e4Q multi-function charger uses four completely independent but identical circuits with a power output of 50W per power. It is designed for charging 2-4 LiPo batteries. Insert the battery into the right connector of each port, charge The appliance will also charge 4 battery times. The charging current can be adjusted by pressing the button 2A / 3A / 5A The charging capacity can show the charging current in the LED indicator through the color change.

SkyRC E4Q DC Charger:DC Input: 11-26.1V
Low Voltage Alert: ≤10.9V
High Voltage Alert: ≥26.5V
Max. Power: 200W (4x50W)
Battery Type: LiPo, 2S/3S/4S
Charge Current: 2A/3A/5A (Selectable)
Balance Current: Max. 400mA/Cell
Size: 128 x 128 x 50.5 mm
Net Weight：280 g